- "> |
- Spray Paints |
- Rust-Oleum American Accents Stone Textured Spray Paint
Properties of American Accents Textured Stone Spray Paint
|Resin Type||Water-based Acrylic|
|Pigment Type||Varies with color|
|Recommended Dry Film Thickness |
(DFT) Per Coat
|1.0-2.0 mils (25-50µ)|
|Practical Coverage at Recommended |
DFT (assumes 15% material loss)
|Dry Times at 70-80°F (21-27°C) |
and 50% Relative Humidity
|5 minutes to touch and re-coat any-time|
|Shelf Life||5 years|
|Flash Point||-156ºF (-104ºC)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|
How to American Accents Textured Stone Spray Paint?
Ideal Conditions to Use
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90ºF (10-32ºC) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces to create a surface profile.
Shake can vigorously for one minute before spraying. Can does not contain a mixing ball. DO NOT STRIKE CAN. Shake often during use. Hold can upright 10-16” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.
Write Your Own Review